SafetyApril 2, 202612 min read
Tandem Crane Lifts: Planning, Engineering & Multi-Crane Coordination Requirements
Tandem lifts multiply crane risks exponentially. Learn engineering requirements, load distribution calculations, communication protocols, OSHA multi-crane coordination rules, and critical lift planning for tandem operations.
RiggingMarch 8, 202611 min read
Rigging Inspection Requirements: Slings, Shackles, and Hardware
Complete OSHA rigging inspection requirements under 29 CFR 1926.251. Covers wire rope sling criteria, synthetic web sling checks, chain sling inspection, shackle load ratings, and removal-from-service standards.
InspectionApril 21, 202614 min read
Rigging Hardware Inspection: Shackles, Turnbuckles, Eyebolts & Connecting Components
Complete guide to rigging hardware inspection covering ASME B30.26, shackle types and inspection criteria, turnbuckle inspection, eyebolt orientation requirements, removal criteria, proof testing, and documentation.
OperationsMay 6, 202614 min read
Crane Inspection for Precast Concrete & Tilt-Up Erection: Panel Lifting Safety
Complete guide to crane inspection for precast concrete and tilt-up panel erection covering panel weight verification, lift insert inspection, rigging for asymmetric loads, wind exposure during erection, temporary bracing coordination, and OSHA 1926 Subpart Q requirements.
OperationsMay 9, 202613 min read
Crane Inspection for Modular & Prefab Building Construction: Multi-Point Rigging & Oversized Load Handling
Complete guide to crane inspection for modular and prefab building construction covering multi-point rigging for large modules, center of gravity challenges, wind exposure on large flat loads, road permitting for oversized transport, and tilt-up vs crane-set methods.
InspectionMay 9, 202613 min read
Crane Load Block, Headache Ball & Swivel Inspection Criteria
Complete guide to crane load block, headache ball, and swivel inspection covering sheave and side plate inspection, hook integration, wire rope termination, anti-two-block device integration, and ASME B30.10 requirements.
SafetyMay 12, 202615 min read
Crane Tagline Requirements, Load Swing Control & Anti-Sway Systems Guide
Complete guide to crane tagline requirements, load swing physics, pendulum control techniques, anti-sway technology, and OSHA/ASME standards for load control during crane operations.
RiggingMay 12, 202615 min read
Crane Lifting Lug, Padeye & Trunnion Inspection: Engineered Attachment Points
Complete guide to inspecting engineered lifting attachments — lifting lugs, padeyes, trunnions, and weld-on lifting points. Covers design verification, weld inspection, load rating, NDT requirements, and ASME BTH-1 standards.
ConstructionMay 12, 202615 min read
Crane Operations for Tilt-Up & Precast Concrete Panel Construction
Complete guide to crane operations for tilt-up and precast concrete panel erection covering crane selection, panel weight calculations, rigging configurations, bracing requirements, multi-pick sequencing, and OSHA compliance.